The lock cylinders are anti- pick / anti-drill / anti-bump and secure from 3D printing to provide the highest security for home and business owners and facility managers.

Battery operated electronic locks will become more prevalent due to the low cost of installation as in pin coded or digital locks. User codes and master codes can be programmed to open a door. Codes can be deleted if an employee leaves the company. Some electronic digital locks can be programmed to allow employees access only at certain times or days with a full audit trail to tell managers who and when they entered through a door.

Card and fob operated RFID for wire free or wireless electronic handles and cylinders are easy to fit to timber and uPVC doors for domestic and office applications giving full access control facilities.
Stand alone electronic handles and cylinders are operated by cards / fobs which can be deleted at the door if lost or stolen or by a programmer with time zone and audit trail giving full access control facilities without the need to run hard wire electrical cabling.

There are low cost electronic key systems available from a few manufactures and distributors. These can be referred to as Mechatronic systems as it is a combination of mechanical and electronic locking together providing a secure and convenient locking solution. Electronic key systems are very easy to manage as a master key system and very cost effective key control in the event of keys being lost or stolen. An electronic key can operate many different types of locks including cylinders, padlocks and cam locks. These can be programmed to offer full access control facilities in a building or even a field. Some examples being for padlocks on trucks and metal containers, drug cabinets and lockers in hospitals with the cam locks and offices or schools with the cylinders or a combination of all. All the locks can be programmed to work on one key like a regular mechanical master key system but can altered or deleted with the click of a button on the computer or by using a programming key at the door.

There are many other individual types of electronic locking products that offer bespoke solutions. The KnocknLock code key offers an anti-vandal solution for metal and wooden doors as the lock is not accessible. The lock is surface fitted on the inside of the door and the key sends an electronic code through the door to open it if programmed to do so. They are ideal for containers and other doors which are prone to break in and vandalism.
Technology is advancing so fast that there are many locks on the market operated by Bluetooth and NFC from your mobile and smart phones. Authorisation to open a lock can be sent by internet or text to a remote location like a holiday flat or telecom mast to grant access. A coded signal is then resent from the phone to the lock to open the door.

The next technological advance will be with Touch Access technology where the user will be able to push a locked door open without using a key or presenting a card or fob to a reader.
An authorised user will have a fob in their pocket or bag which will send a signal over their skin and deactivate the lock when they touch the door or locking handle.

Many security companies fit mag locks for cost and ease of installation. Most mag lock installations are insecure as they are normally fail safe without battery back up. in the event that the emergency break glass unit is pressed the mag lock will open and the door will remain unlocked until the BGU is reset. Alternatively if the reader or key pad operating the mag lock fails, there is no emergency key over ride option available to open the door from the outside.

A good option is to fit an electric lock with a mechanical key over ride on the outside and a mechanical handle on the inside. Electric locks are normally fitted to the middle of the door whereas a mag is normally fitted to the top of the door which can cause warping of the door. There are electric locks available which are powered via the frame and avoid the door being core drilled to run the wires.

Expert Security Ltd in Dublin are recognised as a leading door locking solution company in Ireland using these innovative locking products for practical solutions in securing homes and businesses with many demonstration models on view in their lock shop in Amiens Street.

The post Door locking for the future appeared first on Expert Security.

• Standards and Regulations
• Doors, Locks & Cylinders
• Patented & High Security Keys
• Master Key Systems
• Door Closers
• Handles / Hinges
• Access Control
• Electric locks and Mag locks
• Wire Free Electronic Locking
• Mechatronic & Electronic Key Systems

Regulation, Standards and Safety Compliance For Door Locks and Hardware

As a property or facility manager you need to be aware of standards and legislation that affect door locking in the buildings that you manage including

• EN 179 standards for emergency door exits. This standard specifies that a lever handle or pad should be fitted to exit doors. The handle has to be of a certain length and height. Exit for people exiting the final door of a building should be with one movement of the body.

• EN 1129 standards for emergency exits specify that a panic latch should be fitted in public buildings like halls and cinemas. Exit should be possible using only a single touch.

• EN 14846 standards for specification of egress hardware for emergency exit doors fitted with electronic locks and access control. Two exit type buttons or mechanical handle should be fitted for safe egress.

• Construction Product regulations 2013 Act legislates for the quality of door hardware. It is a criminal offence since July 2013 for building managers and installers to permit EU non-compliant products on fire and emergency doors. Products should have a DOP certificate to validate the CE marking.

• Equality Act 2005 /  DDA Act is compliance for disabled persons to enter and exit a building easily and without hindrance and discrimination.

• Private Security Act 2004 provides for the installation, repair and servicing of access control, locks or door closer fitted to any common door operated by two or more intercoms or other access controlled devices. Contractors engaged to work on access controlled doors must hold a current PSA security license to install and maintain the hardware on access controlled doors. It is a criminal offence to engage an unlicensed contractor and any insurance claim may be invalidated by engaging an unlicensed contractor.  Licensing for the installation, opening and servicing of locks & safes and the supply of security and master keys will be introduced in 2014. Only licensed contractors will be able to install, repair and open locks or supply security keys with authorisation. 

PRSA licensing is conditional on compliance with these and other regulations. Noncompliance with any of the above may affect an insurance claim.

Doors     

Doors are a very important part of the building security and safety. Every effort should be made to have heavy duty doors at main entrances that will withstand attempted forced entry and vandalism. Fire doors should be compliant with building regulations to curtail a fire and prevent smoke passing through the entire building. Fire doors and emergency exits should conform to the safety standards set out by the local fire officer and building inspector.

Locks

Locks are the mainstay of security for perimeter and internal doors in a building. Modern locks are typically euro cylinder operated where the barrel slides through the lock and the door from the outside to the inside of the door. These can be keyed both sides or with a thumb turn on the inside for easy exit without using a key. There are other types of cylinders including rim cylinders for Yale locks, Scan cylinders for Swedish doors. Chubb type mortise locks are still around but usually on internal doors.

Cylinders

Cylinders are the part of the lock where the key enters and  are usually mushroom shaped. Over time the cylinders wear and it is more difficult for the keys to operate the lock. It is advisable to fit a replacement when the cylinder wears as eventually lock outs occur. A cylinder can be replaced made up to an existing key. However if they are regular keys that can be cut in a shoe repair shop, the chances are that not all the old keys will operate the new cylinder as some of the old keys may be worn as well. Most of these standard cylinders are manufactured in China and wear very quickly and cause problems in opening.

High security patented cylinders

High Security and Patented Cylinders can be fitted for added security with protection from wear and tear. They are more durable than the standard cylinders with anti-pick / bump / drill and 3D printing resistance. These cylinders are operated by high security keys and require authorisation from The Property or Facilities Manager to get copied. These keys are computer originated and will always operate a replacement or keyed alike cylinder added. Tenants cannot get duplicate keys copied without authorisation from the building manager.

The Patent on these key systems last for 20 years from the original date of filing. Many locks on the market are no longer patent protected and can be copied by milling machines, spurious blanks and even 3D printers. The Mul-T-Lock patent expires on December 31^st 2013 and these keys can be copied legally from January 1^st 2014 by any key cutter.

Master key systems

Master key systems can be supplied so that all locks in a building can be opened by their own individual key while all the locks can be opened with a single master key. It is also possible that all the same keys can open a single lock on an entrance gate or refuse shed. It is preferable that a master key system is built using a security key as it can be controlled better by the building manager.

Mechanically coded / digital locks

Mechanically coded / digital door locks and padlocks are suitable for doors where common access requiring lower security is required. They are practical for refuse or utility rooms. Great care should be taken that the codes are not made available to unauthorised persons as it will compromise the security.

Access Control

Access Control normally refers to magnets or electric locks on doors or gates operated by fobs, cards or keypads and the intercom system. Most access control systems are hard wired. You can control who has access with fobs and cards as these can be deleted from the system if someone loses their card or you want to deny access for whatever reason, this can be done by a hand held programmer on site or from a remote computer at a desk.

Battery operated electronic locks

Battery operated electronic locks and access control systems are getting very popular. These can be fitted to any door for low cost access control solutions using fobs or cards. They are cheaper than hard wired systems to install as labour costs are reduced because there is no cabling involved. They are particularly suited to doors that are not pre wired like inner doors at different floor levels or individual office doors. Property managers can still manage to control access and to replace individual fobs or cards without changing the lock or all the keys.

Electronic key systems 

Electronic key systems or Mechatronic keys offer higher security due to the mechanical key security embedded with an electronic chip to delete lost or stolen keys from a locking system. A regular lock cylinder is replaced by an electronic cylinder and gives all the benefits of an access control system with added mechanical security

Magnets

Magnets on doors and gates are normally opened on the outside by a keypad, card /fob or a key switch and from the inside by a push button release and break glass units. Magnets are fitted to the top of the door but over time they cause the door to warp and misalign from the frame. Doors fitted with magnets break more easily when brute force is applied.

If the power fails or a break glass unit is broken, the door will remain open until repaired or reset. This is commonly referred to as fail safe or fail open. Special attention should be given to magnetic locks fitted to ensure that they comply with EN standards as many of them do not.

Electric locks

Electric locks are preferable to magnets as they are more secure in the event of a power failure or vandalism while still retaining safe egress. Electric locks are fitted to the middle of the door which prevents warping and more secure against forced entry.

Electric locks can be opened by all of the above along with mechanical keys on the outside and a handle on the inside. If the power fails or a break glass unit is vandalised, the door remains locked. This is commonly referred to as fail locked or fail secure.

Door closers

There are different types of door closers with closing power ratings. Doors closers are graded by the strength of their closing and latching action. Internal or light duty fire doors are normally graded 2/3 strength while main and heavy doors require a 4/6 rating. There are different valves to adjust the piston for the door speed and latching action. The heavy duty closers have a back check function for smoother action

Door and latching speeds should be synchronised properly to avoid slamming when closing. Winds can affect the door operation and high power closers should be fitted if the door is exposed.

4/5 graded closers should be fitted where necessary to ensure a smooth latching action to compliment the secure latching of a lock while preventing the door slamming and creating excessive banging and noise.

Hinges and pivots

Hinges and door pivots should be maintained in good condition as any excessive wear will cause the door to drop. Hinges and pivots should be lubricated frequently to minimise wear and friction.

Handles

Poor quality handles fitted to doors are prone to breaking and denying users safe exit. The internal springs and clips are weaker. They break easier and disengage from the door. Handles should be fitted to the door with long screws or preferably with bolt through fixings to prevent the handle coming away from the door.

 IF IN ANY DOUBT YOU SHOULD ALWAYS CONTACT YOUR LOCAL BUILDING OR FIRE OFFICER TO ENSURE THAT THE LOCKING HARDWARE THAT YOU USE, COMPLY WITH THE APPROPRIATE LOCAL STANDARDS AND REGULATIONS.

Proudly brought to you by:

The post Door Locking tips for Property and Facility Managers appeared first on Expert Security.